LIQUID VINYL MOTO PACK STANDARD COLOURS

46,9951,99

LIQUID VINYL MOTO PACK spray is specially designed for you to paint your moto. This pack consists of:

  • 5 Sprays Full Dip liquid vinyl Standard (choose from the drop down)
  • 1 Glossy or Matte Protection Top Coat (Optional)

ATTENTION!! Liquid vinyl must be completely dry before applying the Glossy or Matte top coat. Wait at least 24 hours to ensure it is 100% dry.

Clear
SKU: EN-PMTPS01 Category:

Description

LIQUID VINYL MOTO PACK STANDARD COLOURS

LIQUID VINYL MOTO PACK STANDARD COLOURS

With LIQUID VINYL MOTO PACK STANDARD COLOURS becomes a tough, elastic and durable coating you can peel of like a sticker. It is also waterproof ad high-pressure water washable. It is a great option for customization, but above all, FullDip will give your car extra protection against scratches, dirt and humidity.

Full Dip Liquid Vinyl 400ML Aerosols Main Features

  • Easy to use liquid vinyl aerosol. Once it dries, the spray turns into a tough, elastic and durable coating.
  • Easy to peel off.
  • Easily washable with most kinds of cleansers, water-resistant, dirt-resistant, high-pressure water cleanable.
  • No cracking or self-peeling over the years.
  • Fast drying, really flexible once dried.
  • Water resistant, therefore it won’t fade or drip due to the rain or car washing.
  • Traceless and easy peeling, protects surfaces from friction and rubbing.
  • Use both indoors and outdoors.
  • One Full Dip aerosol (400ml) coats up to 1.2m2.
  • Full Dip is cheaper and better quality than Plastidip.

Directions:

  1. First of all, the surface to paint must be freshly cleaned and dried for best adherence.
  2. Once your car is ready, shake the liquid vinyl aerosol well for a few minutes before spraying.
  3. Then, let the aerosol sit for a minute or two – this will prevent bubbles from forming.
  4. Let’s start ! Apply several layers of liquid vinyl. Let it sit and dry 10-30 between layers, depending on temperature. As a result, you will get a fine, homogeneous coating.
  5. In order to achieve an appropriate thickness, we suggest applying at least 4 layers of Full Dip liquid vinyl. As a result, you will be able to peel it off easily when you want to. Certainly, you might have problems in the future if the coating is too thin.
  6. Approximately, full drying takes around 24 hours. Just wait and then enjoy your great results!

Technical Information:

  1. Don’t expose aerosols to temperaturas above 50ºC
  2. Avoid extremely low or high temperatures when applying the product. Optimal temperature among 5ºC and 35ºC.
  3. Wait at least 10 minutes between layers.
  4. Aprox 1h of drying per layer (approx. 0.2 mm).
  5. Approximate durability : Full Dip is likely to last between 1 and 3 years, depending on weather conditions and other factors.
  6. Content of the Full Dip aerosol : 400 ml.

 

Choose your favourite colour and get your DIY Full Dip Tyre Pack ! Have a look to our tutor

Additional information

CHOOSE YOUR COLOUR

BLACK, WHITE, GUN METAL, GREY NARD, CAMO GREEN, LIME GREEN, RED, ORANGE, BLUE, PURPLE, PINK, CHERRY RED, CARMIN RED, LIGHTLY BLUE, CAMO BROWN, CAMO TAN

WOULD YOU LIKE TOP COAT?

GLOSSY TOP COAT, EXTRA PROTECTION TOP COAT, NO

Reviews

There are no reviews yet.

Be the first to review “LIQUID VINYL MOTO PACK STANDARD COLOURS”

Your email address will not be published. Required fields are marked *

WhatsApp Ayuda / Assistance