Description

BLACK ACRYLIC PAINT

High temperature resistant.
Fast drying.
High adherence to any surface. We suggest doing an adherence test on aluminium and high temp plastics.
Really elastic and durable in the long run.
Water resistant, high pressure washable and suitable for tunnel washers.
Uniform, smooth finish.
1 400 ml aerosol is enough to paint your 4 brake callipers.

It takes about 10 minutes to feel dry to touch.
Heat makes this paint crystallise. Heating-cooling cycles will harden it and make it durable and resistant.
Lifespan: more than 3 years.
400 ml are enough to coat once a 2 m2 surface.
To achieve the maximum resistance, we recommend 0.2 mm of thickness.
Full dry takes around 24 hours.
Avoid extremely low or high temperatures when applying the product. Optimal temperature between 5ºC and 35ºC.

Clean and dry thoroughly the surface about to be painted. Eliminate anything that might affect adherence negatively, such as dirt, oxide or old paint.
Shake well the paint for a few minutes. Then let it sit for about 60 seconds in order to prevent bubbles.
Spray the first coat – it must be thin and not cover the surface completely. It will help the following coats adhere best.
Keep applying coats, leaving to dry for 10-15 minutes between layers.
Apply at least 4 – 5 coats.
If the surface was correctly cleaned and dry, adherence should be optimal, as well as the result and durability of the product.
Leave it to dry completely for 24 hours.

Choose your favourite colour and get your DIY Full Dip Tyre Pack ! Have a look to our tutor

There are no reviews yet.

Be the first to review “BLACK ACRYLIC PAINT”