{"id":16514,"date":"2019-05-23T12:12:00","date_gmt":"2019-05-23T12:12:00","guid":{"rendered":"https:\/\/tiendafulldip.com\/how-to\/"},"modified":"2019-11-22T17:46:27","modified_gmt":"2019-11-22T17:46:27","slug":"how-to","status":"publish","type":"page","link":"https:\/\/tiendafulldip.com\/en\/how-to\/","title":{"rendered":"How to"},"content":{"rendered":"\n[et_pb_section fb_built=”1″ _builder_version=”3.22″][et_pb_row _builder_version=”4.0.6″][et_pb_column _builder_version=”4.0.6″ type=”4_4″][et_pb_text _builder_version=”4.0.6″ hover_enabled=”0″]

HOW TO USE FULLDIP<\/strong><\/h1>\n

<\/strong><\/p>\n

HOW TO USE FULLDIP<\/strong>\u00ae LIQUID VINYL?<\/strong><\/h2>\n
    \n
  1. CLEAN THE SURFACE TO BE PAINTED<\/strong><\/li>\n<\/ol>\n

    Before you start to spray the vinyl on, it is very important to clean all surfaces perfectly, making sure it\u2019s dry and free of dirt, dust, grease, waxes, cleaning products or anything that might interfere with the adherence of the vinyl. Take your time to degrase every corner. Then, dry thoroughly.<\/p>\n

    IMPORTANT SPECIFICATIONS: if the surface to paint is in good condition and original colour is smooth and even, you might not need to apply a white or black colour base, always considering colorimetry tendencies. In contrast, if the paint is faded or uneven, we recommend applying white or grey liquid vinyl as a base, before layering the desired colour. This will guarantee the final result is uniform and solid, but the hue may vary depending on the base.<\/p>\n

    NEON colours always require a white base, as they do not have a strong pigmentation power by themselves. This colour range has a shorter lifespan due to the direct exposure to sunlight. To prevent neon FullDip\u00ae <\/strong>from fading or bleaching and keeping it in neat condition for longer, we recommend reapplying 2 layers every 6 months approximately.<\/p>\n

      \n
    1. TOLERANCE TEST<\/strong><\/li>\n<\/ol>\n

      FullDip\u00ae Liquid Vinyl can be layered on multiple kinds of surfaces, such as metal, plastic, glass, wood, etc. Nevertheless, is always advised to do a previous test on a small section. Once it\u2019s fully dry, FullDip\u00ae can be easily peeled of any non-porous surface.<\/p>\n

      HOW TO USE <\/strong>FULLDIP<\/strong>\u00ae 400ML AEROSOLS (14 UK fl.oz.)<\/strong><\/h2>\n
        \n
      1. Shake well<\/strong><\/li>\n<\/ol>\n

        Shake vigorously FullDip\u00ae before use. Before the first use, make sure to shake for at least two minutes so all components and pigments are homogeneously mixed. You will hear steel balls moving and mixing the fluid.<\/p>\n

        If temperature is below 10\u00baC it is recommended to apply moderate heat (e. g. hair dryer) on the aerosol in order to reach the optimal temperature for application.<\/p>\n

          \n
        1. Spraying<\/strong><\/li>\n<\/ol>\n

          Start layering the liquid vinyl spraying it on the surface, leaving 20-25 cm of distance. The more layers you apply, the easier it will be to peel off in the future. Around 4-6 layers is ok.<\/p>\n

          Let sit to dry 10 minutes between layers. After 10-30 it will be dry to the touch, but complete drying of the paint takes around 24 hours.<\/p>\n

          The first layer should be thin and uniform. This layer will guarantee perfect adhesion and the following layers will give depth to the colour.<\/p>\n

          IMPORTANT: When using FullDip\u00ae Liquid Vinyl, we recommend using a mask.<\/strong><\/em><\/p>\n

            \n
          1. Drying and colour setting<\/strong><\/li>\n<\/ol>\n

            In order to ensure a suitable molecular stability, FullDip\u00ae needs to be let sit and dry for at least 6 hours before being exposed to temperature changes, handling, etc. This fact is vital to guarantee a neat finish, adhesion and durability. Total drying and colour setting is considered after the first 12 hours, but for best results, leave for 24 hours. Do not expose treated surfaces to sunlight during this process.<\/p>\n

            Remember FullDip\u00ae Liquid Vinyl is not a permanent colour coating, you will be able to peel it off whenever you want, leaving no trace on the original colour.<\/p>\n

            HOW TO USE <\/strong>FULLDIP<\/strong>\u00ae 4 LITRE BUCKETS (140 UK fl.oz.)<\/strong><\/h2>\n

            Prepare the surface to be painted as explained above. Clean and dry thoroughly (see HOW TO USE FULLDIP<\/em>\u00ae LIQUID VINYL? Section 1<\/em>).<\/p>\n

            FullDip\u00ae 4 litre buckets are ready to use. It is not necessary to mix it with other products, such as diluent. In order to layer it on, you will ned a spray gun. We strongly recommend using the gun we have developed specially for FullDip\u00ae Liquid Vinyl. It will give you a high quality result for a very low price.<\/p>\n

              \n
            1. Stir well<\/strong><\/li>\n<\/ol>\n

              Stir the liquid vinyl with a spatula, stick or mixing spoon for a few minutes, make sure there are no lumps or pigment rests at the bottom. Get the deposit of your spray gun filled up.<\/p>\n

                \n
              1. Spraying<\/strong><\/li>\n<\/ol>\n

                An electric spray gun is best, but a spray gun with a compressor will do too. If using a compressor, it is important to use a 1.8 \u2013 2 mm nipple to minimise the pressure as much as possible. It is very important to avoid pulverization; the gun FD650 makes very low or zero pulverization.<\/p>\n

                Apply at least 4 layers of liquid vinyl. For best results, 4 to 6 coats.<\/p>\n

                Make the first layer be homogeneous and thin, so as to ensure perfect adherence of the next layers and to prevent it from dripping. Drop marks, if happen, will be noticeable in the final result. The following coats should be thicker for these reasons:<\/p>\n